Across
- 3. the software used to draw 2d shapes
- 6. isometric circle
- 7. side of an object, represented in a multiview drawing; dimensions: width and depth
- 9. linetype consisting of equal length dashes
- 10. to lengthen a line to a chosen intersecting line
- 15. the point at which you ‘grab’ an object
- 16. coordinates input with both a distance and an angle
- 17. the point where two lines meet
- 18. the way a line or curve is displayed
- 20. the thick dark line surrounding the drawing space and title block
- 23. linetype consisting of long dash short dash
- 24. the center of a line or arc
- 29. line type of thin, light lines; often removed from a drawing
- 30. to create a duplicate object parallel at a set distance from a current object
- 32. coordinates given in relation to previous point
- 34. sets paper size
- 35. a pictorial sketch where two axes from a 90 degree angle
- 37. lines that are parallel to isometric axes
- 38. the depth coordinate
- 41. title, name, date, scale, and drawing number are located here
- 42. to shorten a line to a chosen intersecting line
- 43. allows you to duplicate an object, opposite the current object
- 44. side of an object, represented in a multiview sketch; dimensions: depth and height
- 45. text command that allows you to draw a textbox
- 46. creates an object with four right angles
- 49. to extend an object
- 51. 2d object with no straight lines
- 52. computer aided design
- 54. small squares and triangles that appear on objects as you select them
- 55. vertical coordinate
Down
- 1. always appears red, used to describe words and numbers
- 2. computer aided drafting and design
- 4. coordinates measured in relation to the origin (0, 0, 0)
- 5. to cut an object or line in half
- 8. linetype of solid, thick lines
- 11. to create multiple entities out of a single entity
- 12. commands and toolbars are located here
- 13. arcs, circles, or lines that touch only once
- 14. allows you to draw lines at angles with set snaps
- 19. where two lines cross
- 21. horizontal coordinate
- 22. creates a rounded connector between two lines
- 25. lines that never meet and are always the same distance apart
- 26. text command for one line at a given angle and height
- 27. side of an object, represented in a multiview sketch; dimensions: height and width
- 28. the space within the border and above the title block
- 29. osnap option, locates the middle of a circle
- 31. the point at either end of a line or arc
- 33. type of pictorial sketch where all sides are represented equally
- 35. (0, 0, 0)
- 36. puts a non-associative pattern within an enclosed space
- 39. the basic shape needed in order to draw an isometric circle
- 40. the measurement all the way across a circle through the center point
- 47. a green line that allows you to pick new points relative to current points
- 48. used to group objects in a drawing by function, standards for color, linetype, and lineweight
- 50. half the distance across a circle
- 53. allows you to ‘jump’ to specific points
- 54. an area covered with regularly spaced dots or lines to aid drawing