Across
- 3. Anything over 30V DC or AC (LRSM, 4)
- 4. This tool must be lead-free if used in the laboratory. (LRSM,6)
- 6. Used to simplify wiring in a schematic; collection of nets. (sim,173)
- 9. Should never be used on an electrical fire (LRSM, 4)
- 12. By writing this on each page of your Lab Notebook, you can quickly find notes weeks after they were made. (WLNB,78)
- 13. Used to store data such as numbers or equations. (mat,13)
- 15. Required material for lab to document results. (syl,12)
- 19. Group of components that contail resistors, inductors, etc. (sim,63)
- 20. Collection of inter-connected circuits. (sim, 160)
- 23. Each component has this property when placed on the workspace; numbered in the order they were placed. (sim,169)
- 24. Key to writing good notes in the Lab Notebook. (WLNB,63)
- 25. Best load setting for each channel on the function generator. (func, 48)
- 27. Process of joining CH1 meter readings with CH2 meter readings. (pow,30)
- 29. Shorter lab report. (LRSM,37)
- 30. Has a rating of 100V-120V and is located in the back of the function generator. (func,32)
- 32. Set of key words/phrases used with the remote interface of the power supply. (pow,39)
- 35. When this is activated, CH1 and CH2 respond together to any adjustment in voltage. (pow,29)
- 37. Enables the oscilloscope to capture a waveform each time a certain condition is met. (oscope,120)
- 40. Due date for a project. (syl,8)
- 42. The power supply has three of these to deliver DC voltage. (pow,28)
- 44. Tool used to acquire waveform signals and display its information. (adk)
- 45. Used to check voltage, current, resistance etc in multisim. (sim, 32)
- 46. Arrays with multiple rows. (mat,15)
- 47. Graded twice a semester and evaluates lab skills. (LRSM,43)
- 48. This type of work will result in a 0 for the assignment (syl,3)
Down
- 1. Difference between Top and Base values of a waveform. (oscope,180)
- 2. "Sine" and "Square" are one of five of these produced by the function generator. (func,27)
- 5. Typically the last page in a lab report. (LRSM,34)
- 7. Sequence of characters. (mat,25)
- 8. User defined settings and waveforms can be saved to this for future use. (func,39)
- 10. Similar to the oscilloscope, but has a separate section dedicated to it. (adk)
- 11. Setting on a plot that uses a vertical line to track pulse width (adk)
- 13. This knob on the oscilloscope controls the volt/div scale. (oscope,59)
- 14. The best way to communicate with your TA or Professor Bowden during the week. (syl, 10)
- 16. All data in MATLAB is stored in this format. (mat,15)
- 17. Manufacturer of the Analog Discovery (syl,13)
- 18. Each student must ensure that graded material is accurate on this site. (syl, 8)
- 19. Standard cable type that is used to transmit signals from the generator. (func,12)
- 21. Manufacturer of the Analog Discovery. (syl,13)
- 22. you must do this with each one of your sources in a lab report (LRSM, 8)
- 26. Method used to connect an electrical signal from one circuit to another. (adk, section 3)
- 28. Channel used on the ADK to plot X/Y of a waveform. (adk,section 3.3)
- 31. MATLAB can create 2-D and 3-D versions of this. Often used for graphically representing laboratory data. (mat,29)
- 33. This is required after completing a page of notes in the Lab Notebook. (WLNB,30)
- 34. Notes should not be taken using this writing instrument (WLNB,24)
- 36. Draft lab report done before each lab (LRSM, 13)
- 38. Section of the Lab Notebook that outlines whose book it is and what the purpose of the notebook is. (WLNB, 68)
- 39. Returns instrument to specified setup. (pow,25)
- 41. Configures display to best fit the waveforms on the screen. (oscope,28)
- 43. This knob on the oscilloscope controls the time/div setting. (oscope,44)