Across
- 2. The protective conductor in a circuit.
- 4. A 230v install in classed as ____ voltage.
- 7. If a low result between conductors. insulating material is found, the circuit has current ________.
- 8. In the first test, you must record the __________ test result (this is the furthest point in the circuit.
- 12. An electrical test used to check if current flows throughout the circuit.
- 14. Press these against the terminals to get a reading.
- 15. I press ______ when I want to measure the circuit.
- 16. The symbol > means, ______ than.
- 18. This board is used to separate out different circuits.
Down
- 1. The 500V applied to the circuit when testing is _._. current.
- 3. This test checks to see that the Lives are installed in the correct terminals.
- 5. You must _____ the two test leads before testing.
- 6. The SI unit that the first electrical test measures.
- 9. There are this many tests in an IR test (for single-phase).
- 10. one of the live conductors.
- 11. Another, more professional name for a testing instrument.
- 13. This safe procedure must be performed before everything.
- 17. Connect all "earths" in this terminal.
- 19. Applying 500V to the conductors of a 230V circuit to measure the ___________ resistance.