Across
- 1. A ______-way switch is used when a device can be turned on or off at 3 or more locations
- 6. Most common material used in residential wiring conductors
- 7. This wire is usually white
- 8. If a box is rated to to support a ______fan, it will be stamped on the box
- 9. When conductors can't be concealed in a wall a_____is used
- 11. Each slot for a "yoked device" can be referred to as a __
- 12. 14/3 wire has a ground and _______ conductors in the jacket
- 13. This wire is typically bare copper or green
- 14. A ________pole switch is used when two circuits must be controlled on the same switch
- 15. Is a circuit protection device with a metal strip that will melt if the circuit is overloaded
Down
- 2. ____________depends on material, cross-section and length
- 3. Conductors are sized by their amperage carrying capacity, also known as_____
- 4. Non-metallic(NM) cable is commonly referred to as
- 5. Circuit protection device that can act as a switch and has two ways to protect the circuit
- 10. These boxes are used when a device is installed in a wet location