Across
- 2. These MDO3000 Oscilloscope models also feature _______ from 100 MHz to 1 GHz.
- 5. If multiple materials are submitted for the same assignment, only the _____ submission will be graded.
- 7. Prior to coming to lab, you must perform all calculations and create ____ in your lab notebook.
- 8. Counter The AFG1022 Arbitrary/Function Generator also includes a 100 MHz ________________.
- 9. The Keithley 2231A-30-3 DC Power Supply’s _____ and noise are less than 5 mVpp.
- 10. in comparison to other programming languages, the ________ type does not need to be declared in MATLAB in order to use them.
- 12. The Analog Discovery Kit 2 features in app scripting called __________.
- 13. in the ADK’s plotting function, the ______ are used to take amplitude measurements or find certain points of the waveform (i.e., band or channel limits).
- 15. MATLAB has multiple plotting functions, some of which are ____, semilogx, and loglog.
- 17. to ensure the function generator is up to date you can use the front panel USB connector to update the machines _______ by using a USB flash drive.
- 19. The Keithley 2231A-30-3 DC Power Supply also has a 0.06% basic _____ accuracy.
- 23. You will receive a _____ if you miss an exam/laboratory proficiency unless you have not done one of the following: notified the instructor ahead of time or there is an emergency (according to the university’s definition).
- 24. ________ the size of Multisim can result in the toolbars to shrink as well, in which some functions will disappear. In this case, they are not gone they are just hidden and can reappear if you click on the double arrow icon in the toolbar also known as the more buttons icon.
- 25. A proper lab notebook must have a clear, descriptive heading, legible and grammatical writing, a witness who has read and signed the page, and the author must date and ____ the entry.
- 26. The DC Power Supply used during lab will also include a feature that protects against overvoltage and ____________.
- 27. The _______ toolbar of Multisim lets you use certain functions such as an oscilloscope, multimeter, function generator, etc., so that you can measure the simulated schematic/circuit.
- 29. _____ points will be deducted from the submitted work for every day that the assignment is late, unless submitted after the last acceptance date in which the work will not be accepted.
- 30. students should ______ themselves if they work with static sensitive components using a grounding strap.
- 32. to ensure the functionality and that it does not succumb to damage, do not have the following in the vicinity of the generator: sprays, _____, or solvents.
- 33. acceptance According to the course syllabus, the column labeled _________ refers to the last day the specified work will be accepted.
- 36. If work the student has done is lost, it is the student’s _________ to repeat the work as the instructor will not accept any exceptions.
- 39. The MDO3000 oscilloscope made by Tektronix contains two or four _____ channels for time domain measurements.
- 41. The ________ toolbar of the ADK lets you control what happens to the waveform in order to measure the desired results or view the waveform.
- 43. The Keithley 2231A-30-3 DC Power Supply offers three ______ output channels in which the 3 A channels have two 30 V and the 3 A having one 5 V.
- 45. You should NEVER install or remove ______ from a powered/energized circuit or any equipment.
- 47. In MATLAB _______ that are created by variables are deleted/destroyed after it is executed.
- 49. ________ is an application/program that allows you to simulate and construct a schematic of a circuit.
- 50. Whenever the student attaches a passive voltage probe to any input channel for the first time, they must __________ the probe so that it correctly matches the corresponding input channel.
Down
- 1. The ADK has an ________ function which allows you to view signal voltages in a two-dimensional graph where the voltage being measured is being plotted against time.
- 3. MDO3000 Mixed Domain Oscilloscopes are 6 in 1 ________ oscilloscopes which have multiple different functions such as a spectrum analyzer, arbitrary function generator, logic analyzer, protocol analyzer, digital voltmeter and frequency counter.
- 4. In a working environment, the employer must provide the employee with a clear understanding of what __________ they can and can not take with them.
- 6. Work that is plagiarized will result in a zero and the student responsible will be written up for an _________.
- 11. The students will learn to use a AFG1022 Arbitrary/Function Generator which include three generator functions in one which include: A 25 MHz Function Generator, A 12.5 MHz Pulse Generator, and A 14-bit _____________________.
- 14. The Keithley 2231A-30-3 DC Power Supply also have the following features: intelligent fan control, energy _________, and noise reduction.
- 16. For the condensed lab report format, you should place “N/A” in the sections labeled summary, introduction, and _______.
- 17. csv ______ can be read in MATLAB using the command line: csvread.
- 18. You should always wear ________ when soldering.
- 20. Do not _______ circuits while energized.
- 21. students should be able to distinguish the input and output ________ when connecting the cables to ensure that there is no wrong connection being made.
- 22. The three rules/ideas of writing in the lab notebook can be seen as the following: clear layout, clear descriptions and good _______, which will result in a clear and organized lab notebook.
- 28. The MDO3000 oscilloscope also features a dedicated ___ input channel for frequency measurements.
- 31. Case bound, _______ lab notebooks with durable paper are required for this lab as it ensures the safety of the work inside the book.
- 34. _______ also known as MATrix LABoratory is a program/application that utilizes scripting and other functions to simulate data and can be of use in mostly everything involving science and engineering.
- 35. The standard report format must include a cover page, a summary/abstract, equipment, introduction, ____________, measurement results, discussion, conclusion, questions, and a reference page.
- 37. The toolbars in Multisim can be ______ in place so that they are out of your way.
- 38. Lab notebooks should be ________ by keeping them in drawers or lockers when they are not being used and should prevent their notebooks from being lost or damaged.
- 40. In the ADK, when the state is labeled ______, this means it is waiting for a trigger event to occur.
- 42. Make sure the AC input voltage ________ on the Keithley 2231A-30-3 DC Power Supply does not exceed 10% of the working voltage range as this will ensure no fire or electric shock occurs, putting both the student and the environment at risk.
- 44. The lab notebook must be written in blue or black ___, a ball point pen with a fine point is recommended/required for this lab course.
- 46. The _______ toolbar of Multisim allows you to run/resume, pause, and stop the simulation of the circuit.
- 48. The ____ panel button can be used to create modulated waveforms, this can be done by using the button menus to create the desired modulation type and shape of the output waveform. Be aware that modulation, sweeping and burst modes are exclusive to channel 1 while continuous mode can be used in Channel 1 and Channel 2.