Electronics with a "S"

2. A component that opens or closes a circuit path
4. An undesired pathway, usually low resistance, in a circuit
5. A device used to create different wave forms.
7. A level of IC Complexity in which there are less than 12 gates per chip
11. The process of refining an A-D measurement using a sequence of steps.
13. Display: An alphanumeric display made up of seven segments.
15. The selection of one out of a number of inputs to be chosen through multiplexing
16. A waveform which consists of pulses defined as high and low.
17. A number which is to be subtracted from another
18. Logic expression consisting of two or more AND terms (products) that are ORed together
19. Logic that is based on the output of a previous state.
21. A circuit that subtracts two binary numbers.
22. Motor which has permanent magnet for rotor which moves as the stator winding steps around

1. To occur or happen at the same time
2. Digital circuit that accepts binary data from some input source and then shifts these data through a chain of flip-flops one bit at a time to a higher order or lower order.
3. Leftmost bit of a binary number which designates whether the number is positive (0) or negative (1)
5. The origin of a digital input.
6. A waveform of a single constant frequency and amplitude that continues for infinitely.
8. A counter in which data is shifted through to another flip-flop or shifted back to the input of the first flip-flop.
9. A logic type in the TTL family
10. A wiring diagram or blueprint of a circuit
11. Counter in which all the flip-flops are clocked at the same time.
12. To preset or turn on a flip-flop and cause the output, Q, of a flip flop to assume a 1 level.
13. Small Scale Integration; A level of IC complexity in which there are less than 12 gates per chip
14. Transfer of data from one place to another one bit at a time.
18. A connection of components so that the same current flows through each one
20. Field winding in an electric motor