Energy Management Module 8

3. A Z-Wave zone controller can NOT modify a _____.
5. Groups of devices defined by their location.
7. If you have 16 possible unit codes and 16 possible house codes how many devices could a single X-10 remote work with?
10. Examining an outlet to determine if its _________ is an acceptable suggestion to a customer if there outlet is not working with X-10.
11. A _____ LED means the Z-Wave system is ready for programming.
13. An X-10 appliance module is NOT ________.
14. Checking the home and unit code on an ______ is an acceptable suggestion to a customer if there outlet is not working with X-10.
15. A _____ LED means the Z-Wave system is programmed.
16. What system will have both lamps come on if they both share the same home and unit addresses?

1. Group of devices in an area that can be turned on or off but not adjusted, and can include more than one area.
2. Switches, outlets, scene controllers and zone controllers in a particular room, area, or zone.
4. Groups of devices from multiple rooms within multiple areas connected to a control.
6. What is the procedure to remove programming from a Z-Wave switch called?
8. A _____ LED means the Z-wave system is not programmed.
9. A Z-Wave system has an operational range of ______ feet.
12. A Z-Wave ______ can control both scenes and zones.
17. The X-10 ___________ is always unit one.