Foundation,Floor,Wall Framing and Truss

Edit Answers
123456789101112131415161718192021222324
Across
  1. 1. Goes in between joists and bottom plate.
  2. 4. Where all parts or joints are connected with in a truss.
  3. 7. The top of a framed wall that is non load bearing.
  4. 8. Type of stud that sits under header.
  5. 9. Rafter Chord Webbing
  6. 10. the bottom part of a truss
  7. 12. A long spanding metal or wood that sits on Column and footing that has to be level with sillplate
  8. 15. the outside border of all joists that is anchored to sill plate
  9. 16. The parts of a truss that are inside of the chord and rafter.
  10. 20. Type of stud that goes on the outside of header and Jack stud.
  11. 21. goes on the bottom of a wall that is anchored to subfloor and all joist.
  12. 22. sits on top of jack studs and in between king studs.
  13. 23. Part of a roof where gutter go.
  14. 24. must be level with girder,transition foundation to wood.
Down
  1. 2. The peak of the roof
  2. 3. . The visible flat running board that caps the rafter tail ends.
  3. 5. Concrete above and below ground that distributes weight to the ground on the outside border of structure
  4. 6. Where the rafter becomes exterior
  5. 11. The top part of a truss or a Top chord.
  6. 13. Concrete poured in a deep trench to distribute weight to the ground on the inside of structure.
  7. 14. A stud used above or below a rough opening
  8. 17. A wall that has peak.
  9. 18. short spanding large dimensional lumber used to support the flooring platforms of the house.
  10. 19. anchored to top and bottom plate every 16 inches on center