fusion 360

2. DXF - Imports a DXF file into the active sketch. Select a face or plane then select the DXF file to insert. Set the position of the geometry on the selected plane.
5. Two Edges - Creates a construction plane passing through two linear edges or axes.
7. thru 3 points-- Creates a construction plane through three selected construction points
8. Plane - Creates a construction plant that is offset from the selected face or plane.
10. - (keyboard shortcut CMD/CTRL+S) Saves the file that is currently open.
11. By Size - Selects objects based on size. Use the slider bars or directly input minimum and maximum size values to select objects.
12. Documents - Reopen files that were autosaved. Select the file name and click open.
15. Sketch - Enters Sketch mode and creates a new sketch on a selected plane or face. Select Finish Sketch to exit out of the mode

1. - Creates a construction plane at the midpoint between two faces or work planes.
3. - Uses an open sketch curve to create a thin feature. The rib is created planar (parallel) to the sketch plane. Select a curve then specify the thickness.
4. - Zooms in and out as the mouse is moved from left to right.
5. Plane - Creates a construction plane that is tangent to a cylindrical or conical face.
6. - Reverses the effects or results of the most recent action.
9. Orbit - Revolves the object 360 degrees around the center point of the object.
11. - The selection mode controls how objects are select when you drag in the canvas.
13. - Uses an open sketch curve to create a thin feature. The rib is created planar (parallel) to the sketch plane. Select a curve then specify the thickness.
14. - Inserts text into the active sketch. Use text as a profile to create 3D geometry. Select the insertion point and input the text. Modify the format of the text in the Text dialog box.