Fusion 360 Definitions

2. Creates a hole based on user-specified values and selections.
5. Creates a copy of selected faces, bodies, features, or components, mirrored across a plane.
6. Adds thickness to surface faces to create a solid body.
10. select two Straight edges. The centerline is created between them
13. Creates a solid torus.
17. creates a full, half, offset, or aligned section view through the design
19. Locks components together and removes all degrees of freedom
20. select a rounded edge, such as a fillet, hole, sphere, or cylinder
21. rotates a component around all three axes on a gimbal system
23. slides a component along a single axis
24. rotates a component around the joint origin
25. rotates a component around one axis normal to a plane and slides it along two axes parallel to the plane
26. joins, cuts, or intersects two or more solid bodies to create a single solid

1. select a rounded edge, such as holes or fillets. A center mark including a PCD is created
3. Adds depth to opened or closed sketch profiles or faces.
4. creates a projected orthogonal and isometric views of the design
7. rotates and slides a component on a single axis
8. creates a circular detail view of a portion of the design
9. rotates and slides a component on two different axes
11. creates a new internal or external component in the assembly
12. creates a view of the referenced design
14. Sweeps a sketch profile or planar face along a selected path.
15. Creates a transitional shape between two or more sketch profiles or planar faces.
16. Revolves a sketch profile or planar face around a selected axis.
18. add internal or external threads to cylindrical geometry. Threads can be cosmetic or modeled on the geometry.
22. Creates a solid coil.