Across
- 4. rotates a component around the joint origin
- 6. select a rounded edge, such as holes or fillets. A center mark including a PCD is created
- 9. Position components relative to each other in an assembly, then defines the relative motion between them
- 11. creates a solid coil
- 13. creates a new internal or external component in the assembly
- 16. slides a component along a single axis
- 18. rotates a component around one axis normal to a plane and slides it along two axes parallel to the plane
- 20. rotates a component around all three axes on a gimbal system
- 24. creates a circular detail view of a portion of the design
- 25. creates a projected orthogonal and isometric views of the design
- 26. creates a solid torus
Down
- 1. Position components relative to one another and defines the relative motion. Components maintain their current position.
- 2. select two Straight edges. The centerline is created between them
- 3. creates a copy of selected faces, bodies, features, or components, mirrored
- 5. a plane
- 7. adds thickness to surface faces to create a solid boundary fill. creates, joins or removes volumes using bounding volumes formed by tool selections
- 8. sweeps a sketch profile or planar face around a selected axis
- 10. creates a transitional shape between two or more sketch profiles or planar faces hole creates a hole based on user-specified values and selections thread add internal or external threads to cylindrical geometry. threads can be cosmetic or modeled on the geometry
- 12. creates a full, half, offset, or aligned section view through the design
- 14. rotates and slides a component on a single axis
- 15. revolves a sketch profile or planar face around a selected axis
- 17. Locks components together and removes all degrees of freedom
- 19. creates a view of the referenced design
- 21. adds depth to open or closed sketch profiles or faces
- 22. select a rounded edge, such as a fillet, hole, sphere, or cylinder
- 23. rotates and slides a component on two different axes