Fusion deftions

4. Locks components together and removes all degrees of freedom
5. Locks the relative position of the selected components the components are treated as a single object when moved and when joints are applied
6. creates a circular detail view of a portion of the design
7. Creates a half/half, offset, or aligned section view through the design
10. Rotates and slide a component on a single axis pin Slot Rotates and slides a component on two different axes
12. Modifies the selected geometry using offset, extrude, or fillet commands. The operation depends on the geometry selected.
15. Divides faces using a selected profile, face, or plane as the cutting tool.
16. Select two straight edges. The centerline is created between them
17. creates a view of the referenced design
18. Rotates a component around one axis normal to a plane and slides it along two axes parallel to the plane
19. select a rounded edge such as a fillet, hole, sphere, or cylinder

1. Joins, cuts, or intersects two or more solid bodies to create a single solid body.
2. Position components relation to each other in an assembly then defines the relative motion between them as built Joint Positions components relative to one another and defines the relative motion. Componentes maintain their current position
3. creates projected orthogonal and isometric views of the design
4. Rotates a component around the joint origin
8. Rounds the edges of a solid body by adding material to interior edges and removing material from exterior edges.
9. Creates new bodies by dividing selected bodies using a profile, face, or plane.
11. Bevels the edges of a solid or surface body by removing material from exterior edges or adding material to interior edges.
13. slides a component along a single axis
14. Rotates a component around all three axes on a gimbal system (three nested rotations)
16. Mark pattern: Select rounded edges such as holes or fillets. A CenterMark pattern including a PCD is created