Across
- 2. The miter saw, bandsaw, and drill press should come to a _________before removing the workpiece.
- 6. After you have been trained to use the machines, you must always ask________so the teacher can be sure to monitor.
- 9. Keep the floor, the machines, and the work areas _____at all times.
- 10. It is never ok to_________ across the path of the saw cut.
- 13. It is important to keep the____________of the material on the press to your left to prevent the material from swinging around and hitting you if the clamps fail.
- 15. These need to be worn by everyone in the shop when any tools are being used.
- 18. You should _____ reach in toward a bandsaw blade when the blade is moving.
- 20. Classroom_______should be clear of trash, materials, or other items to prevent injury.
- 21. Do not use your_______to secure the workpiece on the machine table.
- 23. On a drill press, never release the______if energized or in the workpiece. Doing so can result in injury or damage to the workpiece or drill press.
- 26. When using the table sander it is important to hold the material so it ___________from you.
- 29. The responsibility for the upkeep, cleaning, and maintenance of the shop belongs to ____________.
- 30. When you sand using the sanding disc, make sure you are sanding on the side that moves in a ___________motion.
Down
- 1. Moving the drill back and forth while drilling will damage the ____________.
- 2. ________ can used to hold small material against the fence of the Miter Saw.
- 3. Never _________the person using a machine or tool.
- 4. Always have ____________on the drill when driiling. This will help keep the hole drilled straight and keep you from drilling into your hand.
- 5. Never try to sand______________.You can sand off your skin or get pinched from the moving parts.
- 7. Moving the workpiece back and forth on the sanding belt prevents clogging and the sudden grabbing of material from the operator.
- 8. Starting your_____ by placing the blades cutting edge against the board is very dangerous. It can cause damage to the guards and cause injury.
- 11. When drilling with a cordless drill, the drill must be set at________.
- 12. When working on removing a jam, turn off the machine, ________ it, and get your teacher's help.
- 14. If the band saw blade breaks or sparks, ________calm, turn off, the saw, and, notify the teacher.
- 16. If you are not sure what to do, make sure to _____ for help from your teacher.
- 17. Make sure to____the machine before you use it for hazards.
- 19. Cuts known a_______are used to allow the band saw to "rest" as it cuts
- 22. Under no circumstance, is _______allowed. This can create an unsafe environment.
- 24. Making a _______with the saw will ensure that the cutting path is clear, the cuts will be accurate and it is safer to cut.
- 25. Keep your focus and your______ on what you are doing. Do not become distracted.
- 27. Using a ____________clamp to the table ensures that you do not damage the tables when drilling.
- 28. When using the bandsaw, it is important to gradually_______the material into the blade. Excessive force can damage the saw.