Across
- 3. _______need to be worn by everyone in the shop when any tools are being used.
- 5. Do not use your_______to secure the workpiece on the machine table.
- 6. Cuts known as_______ cuts are used to allow the band saw to "rest" as it cuts, taking stress off the blade.
- 11. After you have been trained to use the machines, you must always ask________so the teacher can be sure to monitor.
- 14. If the band saw blade breaks or sparks, ________calm, turn off, the saw, and notify the teacher.
- 17. If you are not sure what to do, make sure to _____ for help from your teacher.
- 19. The responsibility for the upkeep, cleaning, and maintenance of the shop belongs to ____________.
- 20. Using a ____________clamp to the table ensures that you do not damage the tables when drilling.
- 22. ________ can used to hold small material against the fence of the Miter Saw.
- 23. The miter saw, bandsaw, and drill press should come to a _________before removing the workpiece.
- 26. Never _________the person using a machine or tool.
- 27. In Mr. Adams' class, it is not ok to_____ the Board with your hand against the fence. You must use a clamp.
- 29. Making a _______with the miter saw will ensure that the cutting path is clear, and the cuts will be more accurate, and safe.
- 30. You should _____ reach in toward a bandsaw blade when the blade is moving.
- 31. Keep the floor, the machines, and the work areas _____at all times.
Down
- 1. Moving the drill back and forth while drilling will damage the ____________.
- 2. Never try to sand______________.You can sand off your skin or get pinched from the moving parts.
- 4. It is important to keep the____________of the material on the press to your left to prevent the material from swinging around and hitting you if the clamps fail.
- 7. Moving the workpiece back and forth on the sanding belt prevents clogging and the sudden grabbing of material from the operator.
- 8. Under no circumstance, is _______allowed. This can create an unsafe environment.
- 9. When working on removing a jam, turn off the machine, ________ it, and get your teacher's help.
- 10. Make sure to____the machine before you use it for potential hazards or set up changes.
- 12. When you sand using the disc, make sure you are sanding on the side that moves in a _________ motion.
- 13. Classroom_______should be clear of trash, materials, or other items to prevent injury.
- 15. When using the bandsaw, it is important to gradually move material into the blade, keeping your fingers out of the path of the blade. Excessive force can damage the saw and cause you to jerk your hand forward into the saw blade..
- 16. When using the table sander it is important to hold the material so it ___________from you.
- 18. It is never ok to_________ across the path of the intended saw cut.
- 21. Keep your focus and your______ on what you are doing. Do not become distracted.
- 23. Starting your_____ by placing the blades cutting edge against the board is very dangerous. It can cause damage to the guards, can damage the workpiece and cause injury.
- 24. Always have ____________on the drill when drilling.This will help keep the hole drilled straight and keep you from drilling into your hand.
- 25. When drilling with a cordless drill, the drill must be set at________.
- 28. On a drill press, never release the______especially if the drill is on, and in the workpiece. Doing so can result in injury or damage to the workpiece or the drill press.