High Speed Networks

12345678910111213141516171819
Across
  1. 2. TCP window sizes from -- Kbytes to 8000 Kbytes
  2. 5. Measuring and restricting packets as they enter the network called ----------
  3. 6. ATM Adaptation layer type --------used for processing and transmission overhead.
  4. 8. Average data rate in bits/second that the network agrees to support for a connection used ------
  5. 9. RTO = q × RTO ,q = -------- is called binary exponential backoff
  6. 12. TCP Flow Control Uses a form of------- window
  7. 13. Field is used to perform high level data link synchronization which indicates the beginning and end of the frame with the unique pattern in frame relay.
  8. 14. TCP’s flow control is known as a--------- allocation scheme
  9. 16. In Cell Loss Priority High priority means CLP = ------
  10. 17. IEEE 802.11 a used ----GHz frequency range for Direct Sequence spread spectrum
  11. 19. ----bit is used to identify less important traffic that can be dropped during periods of congestion.
Down
  1. 1. Kendalls notation system capacity and server notation is -----
  2. 3. is multicast provision of feedback to sources and session participants in MPLS
  3. 4. Resource Reservation type --------is used as Routers for pre-allocate resources
  4. 7. Packet Discard called When a switch buffer reaches a threshold level, preemptively discard all cells in a segment.
  5. 10. ---------Traffic occured in E-Mail & FTP
  6. 11. In this Abbreviations EPRCA E= ----------- proportional rate control algorithm
  7. 14. The error detection mechanism used in frame relay uses the ------- check as its basis.
  8. 15. ATM switch buffer size per port from 256 cells to -------
  9. 18. If Congestion Indication CI=------ means Reduce ACR by amount proportional to current ACR but not less than CR