Across
- 2. In Multisim environment this tool bar contains buttons to access virtual equipment such as Multimeter, function generator, oscilloscope, And more.
- 3. Name of the software used to operate your analog Discovery.
- 5. This is the color of the key to enable CH1 signal output On/Off of your function generator (AFG1022), is located in the front-panel.
- 7. Tape and glue used in your lab notebook should be free of this chemical substance.
- 11. Evaluation performed by the TA or instructor twice during the semester.
- 16. Use this port connector to Save Or recall user-defined waveforms to memory device. This port is also used to update the firmware of your function generator.
- 18. Function name in MATLAB to create two-dimensional line plots.
- 20. In this section of your lab report you list all the instruments used during the lab, including, brand, model, a serial number.
- 21. In Multisim environment this tool bar contains buttons such as Place source, Place basic, Place diode, Place transistor, place analog, etc.
- 23. This key of your Power supply (GPD-3303S enables or disables the front panel keys of your power supply, and therefore When is active it prevent accidentally changing the power supply parameters.
- 26. Name of the software utilized to draw and capture your schematics and simulate your circuits.
- 28. These displays of your Power supply (GPD-3303S) show CH1 or CH2 output Current.
- 30. The waveform generator instrument is also referred with this name in the WaveForms software.
- 32. In computer literature refers to software and services that run on the Internet, instead of locally on your computer as an alternative to store or backup your files.
- 33. This instrument is also referred to as the Scope in WaveForms.
- 35. This word denotes the urgency in which you are expected to record your data in your lab notebook.
- 37. Use this type of cable to visualize the Signals generated by your function generator in your oscilloscope. It Connects from Channel Output of the function generator to the input of the oscilloscope.
- 38. In the MATLAB environment, this word denotes a rectangular array of numbers.
- 40. In the workplace environment this entity is the owner of your lab notebook.
- 41. In Multisim environment this tool bar contains buttons for commonly performed functions, such as new, Copy, cut, save, paste, etc.
- 42. cheap and fast method of paper documents, such as memos, proposals, and reports. These reproductions are typically Taped or pasted in your lab notebook.
- 43. Person responsible for completing the tasks assigned by the professor and uploading work after completion.
- 45. This is the number of oscilloscope channels of your analog discovery.
- 47. Numbers of pages of EECE.3110 syllabus.
- 48. This "Laboratory Report Format” shall only be used when specifically authorized by the instructor. Summary/Abstract section is not required when submitting this type of report.
Down
- 1. Attendance to EECE.3110 course is described by this word. Synonym: mandatory.
- 3. One of the 5 elements of nature. you should never use to extinguish an electrical fire. Also know has H2O
- 4. If your load is much greater than this magnitude, As much loads in are lab are, high impedance mode (high z) Must be used.
- 6. This key of your Power supply (GPD-3303S) turns the state of the channel between on or off.
- 8. This function clears the command window in MATLAB®.
- 9. The action of creating extra copies of your experimental data or files.
- 10. This scale represents the x axis of your scope; it is also known as time/div or sweep speed.
- 12. The first page of your lab report is also known with the name.
- 13. This key automatically configures the oscilloscope (DSO-x 2004A), to best display the input signals.
- 14. The pre-lab shall be uploaded to this web platform.
- 15. Last name of the author of "writing the laboratory notebook" book.
- 17. In MATLAB® this word is equivalent to subroutines or methods in other programming languages.
- 19. These displays of your Power supply (GPD-3303S) show CH1 or CH2 output voltage.
- 22. In Multisim environment this tool bar contains buttons such as Run, pause, stop, step into, etc.
- 24. Process in which the probe capacitance is adjusted to compensate for the effects of the inherent input capacitance of the scope. You should perform this Process to your oscilloscope probes when you don't see a perfect square waveform.
- 25. The meaning of this word is: showing care and effort in your work or duties. It is also the brand of your analog discovery.
- 27. This is the grade you will receive if you don't submit your pre-labs on time.
- 29. Your submission of this document is expected before each lab, to ensure you have a full understanding of what is to be accomplished, the results that are expected, and help you draft your lab report.
- 31. Number of channels of your oscilloscope (DSO-X 2004A).
- 34. This scale represents the y axis of your scope; this scale is also known as volt/div scale.
- 36. Abbreviation for matrix laboratory. This is also the name of a programming language.
- 39. This knob of your Power supply (GPD-3303S Adjusts the output potential difference level for CH1 or CH2. Pressing the knob switches coarse and fine level setting.
- 40. This chemical compound is used to contain Class C fires. You produce this gas when you exhale.
- 44. This is the color of the key to enable CH2 signal output On/Off of your function generator (AFG1022), is located in the front-panel.
- 46. preferred color ink to write in your lab notebook.