Key Concepts of Operate Station Equipment

Edit Answers
12345678910111213141516171819202122
Across
  1. 2. When there is overcrowding on the platform, station staff should monitor the situation through the _____ monitors
  2. 6. The MFAP is located at the _____ staircase (street level) in underground stations
  3. 9. Upon fire detection, the MFAP sends status indication to the _____unit and RTU
  4. 10. Heat and ________ detectors are used to detect the presence of fire
  5. 11. After station staff isolateS the PSD, he/she must place appropriate ______ on the affected PSD
  6. 13. Station staff must provide _____ _____ to any injured passenger who fell on the escalator (hint: 2 words but write without space between the words e.g. go home is written as gohome)
  7. 16. When using the hose reel to fight fire, you should stand _____ the fire and the exit (escape route)
  8. 17. After you rescued the trapped passenger from the lift, you should show concern for their well-being and present the Public Transport _____ to the passenger
  9. 20. Station staff should switch ___ the main power/isolator of the lift before performing the lift rescue
  10. 22. In elevated stations, the MFAP is located at the station's _____ entrance
Down
  1. 1. When fire alarm is activated, it will cause the lift to proceed to the level nearest to the _____ level
  2. 3. When the heat detector/sprinkler system detects the presence of fire, it will send a signal to the ____ (4 Letter Word
  3. 4. If the PSD are jammed and cannot be closed fully, station staff must put _____ to cordon off the doors
  4. 5. After station staff resolves the PSD fails problem, station staff must observe the operation of the affected PSD for the next _____ (spell out the number) trains
  5. 7. When using the hose reel to fight fire, you should be aimed at the _____ of the fire?
  6. 8. When an accident has occurred on the escalator, station staff should _____ the escalator immediately
  7. 12. When all PSDs fail to open, station staff should proceed to headwall panel and turn the _____ switch to the 'OPEN' position (hint: 4 letter word e.g. MFAP)
  8. 14. Before you start the lift rescue operation, station staff should use the lift ______ to calm and inform the trapped passengers that lift rescue will be performed
  9. 15. When checking a fire detection at Gas Protected Rooms or shops, you should feel the _____ for presence of heat and check for signs of smoke
  10. 18. ______ Automatic Fire Suppressant System is installed in most MRT stations
  11. 19. Which module of the MFAP tells you the location of the fire?
  12. 21. Upon fire detection, the _____ indicator of the System Control Module in the MFAP will flash