Across
- 3. If a customer asks what a wind mitigation inspection is, a good description to use is "it's like a _____ ___ for your roof"
- 5. This is the strongest roof to wall connection for an HO3
- 6. While a four point inspection is used for eligibility purposes, a wind mitigation inspection is used for this purpose.
- 7. The customer should order a new wind mitigation inspection if it is a new home purchase, if they have never gotten one, if they can't find it, or in this situation
- 8. Roof deck attachment refers to the size and spacing of the _____
- 9. In the opening protection section of the wind mit, the roof qualifies for this discount if "B" is selected
- 12. A roof is considered _____ if the roof was replaced in 2002 or after
- 13. The acronym we use for the Florida inspection company we have a partnership with
- 14. When metal connectors are secured to the truss/rafter with only 2 nails, the inspector will mark this for roof to wall attachment on the inspection form
Down
- 1. When a roof is 75% hip and 25% gable, the inspector will mark this for roof geometry
- 2. When we apply "anticipated discounts" in the PAS, this is what we would expect the roof to wall attachment to be
- 3. SWR stands for secondary water _____
- 4. You should always upload a wind mitigation inspection to this tab in the Kintranet
- 10. Shingle, tile, and metal are all examples of roof _____
- 11. Hip, flat, and other are all examples of roof shape, a.k.a. roof _____