REO1: Lab, Radiographic and Electrical Safety

Edit Answers
1234567891011121314151617181920212223242526
Across
  1. 2. In an electrical fire, switch off main power supply, close the door behind you and pull the nearest ____ ____.
  2. 4. Operate x-ray equipment only when ____ by an MRT instructor.
  3. 9. No ____ ____ use during a live lab session.
  4. 11. Don’t guess. Before proceeding with use of x-ray equipment ensure that you understand thoroughly what is required. If in doubt, ask for __________.
  5. 13. Radiation _____ worn during all sessions when x-ray unit will be energized.
  6. 14. Prevent the spread of _____. Practice hand hygiene and wipe down equipment after use.
  7. 15. ____ shielding is to be placed on simulated patients during practice and must not cover the area of interest.
  8. 17. No exposures on any _____.
  9. 19. Report any electrical or unusual radiographic exposure problems _____ to your instructor.
  10. 21. Be aware of ____ points on any equipment to reduce chance of injury.
  11. 23. After making an exposure, check the Exposure Index value is within ____ range.
  12. 25. ____ all warning signs, signals and computer pop-up messages.
  13. 26. No food or liquids near the x-ray ____ panel.
Down
  1. 1. Always use the ____ field size which would cover the area of interest. The edge of the x-ray beam is to be seen on all borders of the image.
  2. 3. Report all unsafe conditions, acts and _____ immediately to your supervisor.
  3. 5. Always stand in the control booth when exposing.
  4. 6. Know the location of all ____ ____ buttons.
  5. 7. Before exposing, check technical values to ensure they are ____ for the part being imaged and the ready light is on.
  6. 8. Wear appropriate _____ for practical positioning exercises.
  7. 10. Never ____ the x-ray unit unless an MRT instructor is present.
  8. 12. Demonstrate ___ work habits. Be alert and use caution.
  9. 16. Exposures can only be made when x-ray room doors are ____. Last person out of room does it.
  10. 18. Report ____ equipment immediately. Do not attempt to make repairs.
  11. 20. ___ hands before handling electrical equipment. Do not use cleaning fluids on x-ray components.
  12. 22. Exposures using the mobile x-ray unit are allowed only ___ the x-ray rooms.
  13. 24. _____ all equipment to the correct place when not in use.