Laser Safety

5. Class 3b laser beams are not usually diffuse reflection hazards but are ____ reflection hazards
7. The safety "Speed Limit" in laser safety is the:
9. The laser safety consensus standards are set forth by
10. A common laser producing a primary beam at 1064nm has a shorthand name of:
12. Laser safety eyewear must have the proper protection factor (OD) for the specific ____ of the leaser beam
15. Laser is an Acronym for: Light Amplification by Stimulated Emission of ____
16. Wavelengths of 400nm to 1400nm are known to be in the ____hazard zone
17. The beam ____ is the point of the minimum beam diameter
18. One of the Three Primary Components of a laser are: ____ pump
19. UV lasers can produce both thermal and ____ effects

1. At the University of Chicago Laser User Training is required on an ____ basis
2. In addition the eye and skin hazards Class 4 lasers are considered ____ hazards
3. One of the Three Primary Components of a laser are: ____ cavity
4. For a continuous wave laser the power per unit area incident on a surface is known as the ____
6. One of the Three Primary Components of a laser are: ____ medium
7. The laser was preceded by the:
8. A highly desired form of risk mitigation is the use of ____ controls
11. The harmful UV radiation regions are sometimes referred to as:
13. M^2 refers to the beam quality factor otherwise known as the beam ____ factor
14. A laser pointer must be less than ____milliwatts
15. At the University of Chicago all Class 3b and 4 lasers must be ____ with the LSO