Across
- 4. the opposite of a fine thread screw?
- 5. NEC 300.4(A)(2) requires a ________ to protect conductors in notched wooden member?
- 6. safety ______ shall be worn while drilling in concrete?
- 9. never attempt to override the ______ feature of a powder actuated tool?
- 11. a bend made in a piece of conduit to alter its course?
- 12. ____ anchors are designed to be installed flush with the surface of the base material?
- 13. a one piece self locking used to fasten a bundle of wires and cables?
- 16. RMC stands for _____ metal conduit?
- 19. never leave a powder actuated tool __________?
- 21. ______ bolts are used to fasten items in a hollow wall space?
- 22. for best results a drive pin shall be embedded in a minimum of 1/2" hard _______?
Down
- 1. a LB conduit body with a cover on the top or bottom?
- 2. a fitting used to protect conductors from sharp edges?
- 3. zipties used outside should be ________ resistant?
- 7. a ______ nipple is used between two pieces of electrical equipment in close proximity to one another
- 8. a connection of two or more conductors?
- 10. a heavy duty wood screw with a hex shaped or square head?
- 12. epoxy anchoring systems are commonly used to anchor fastener in _____?
- 14. number of powder levels for actuated tool?
- 15. requires a given time to cure?
- 17. a screw for thin self drilling with a bugle shaped head?
- 18. a trough deigned to carry electrical wires and cables?
- 20. ______ anchors are typically used as heavy duty anchors?