Module 4: Maintaining Windows #1

Edit Answers
12345678910111213141516171819202122232425262728
Across
  1. 8. The __ command fixes file system errors and recovers data from bad sectors.
  2. 9. Mirror is a resiliency type used in Storage Spaces in which data is stored in three locations. This configuration requires at least five physical drives. Data is protected from a simultaneous failure of up to two drives.
  3. 12. Windows automatically defragments a hard drive and__ a solid-state drive once a week.
  4. 17. Command performs file and folder copy functions and has the ability to delete the files and directories at the destination location that no longer exist at the source location using the /purge parameter.
  5. 19. Drives larger than 2.2 TB must use the ___ or GUID partitioning scheme. Use the acronym
  6. 23. Port 3389 is used by both Remote Desktop Connection and Remote Assistance.
  7. 24. Drives contain spinning platters.
  8. 26. Port 23 is used to execute commands on a remote system using a command line.
  9. 27. This partitioning scheme limits volumes to approximately 2.2 TB. Use the acronym
  10. 28. This file system is used for large external storage devices such as external HDDs and large USB flash drives.
Down
  1. 1. An older file system used by optical discs and is being replaced by the UDF (Universal Disk Format) file system. Use the acronym
  2. 2. The __ command examines a magnetic hard drive for fragmented files and rewrites these files to the drive in contiguous clusters.
  3. 3. Used to translate fully qualified domain names (FQDN) into IP addresses.
  4. 4. A ___is a backup of the entire Windows volume, including the Windows installation, applications, user settings, and user data.
  5. 5. provides a means of configuring a space with the total estimated storage that will be needed by the users. The actual space can be less than the provisioned space. When the used space gets close to the actual space, additional drives are added to increase the available space without reconfiguring the space available to the users.
  6. 6. Port 22 is used to execute commands on a remote system using a command line; typically used as a secure replacement for Telnet.
  7. 7. In order to create a simple volume, spanned volume, striped volume, or mirrored volume, the disks in the group must be converted to ____disks.
  8. 10. The ____ command performs file and folder copy functions
  9. 11. This file system is used to support file sharing over a network. Use the acronym.
  10. 13. The ___command is used to copy single files or groups of files.
  11. 14. Hard disk drives contain flash memory.
  12. 15. The utility that creates and restores restore points.
  13. 16. These are system snapshots taken at regular intervals and just before software or hardware is installed.
  14. 18. The ___ command is used to closed down the local computer or a remote computer.
  15. 20. Mirror is resiliency type used in Storage Spaces in which data is duplicated across two drives and requires at least two drives. Data is protected from a failure of a single drive.
  16. 21. The ___ command used on a storage device places a file system on the drive or volume in preparation for storing files. This command performs a high-level layout that installs a files system on the device and erases all data on the volume.
  17. 22. Backs up user data stored in the user libraries, offline OneDrive files, and other files determined by the user.
  18. 25. This file system is still used for small drives and USB flash drives. It does not support file encryption, disk quotas, or file and folder permissions.