Across
- 3. You can wear a respirator voluntarily if you sign _____________ D
- 7. Forklifts must Do this around every corner and when approaching heavy traffic areas.
- 8. Consider a 4:1 _______ ratio when using a ladder.
- 9. Never Work ______ while using fall protection equipment, make sure to have a second person to assist and act as a spotter.
- 11. When to report any incident to your supervisor
- 12. Where our safety incidents are stored and managed
- 15. Always wear _________ under a face shield when handling chemicals.
- 18. Any work above _____ feet requires fall protection measures or personal protective equipment.
- 20. When employees use fall arrest equipment they must consider anchorage ___________ .
- 23. Stretching and setting up workspace to avoid excessive reaching / motion
- 24. Always maintain ________ points of contact on a ladder
- 26. Minimum requirement for safety observations is one per __________
- 28. _______must be done before working on equipment with hazardous energies.
Down
- 1. Forklift inspections are required every ______ they are used
- 2. PAPR= Powered Air Purifying _________
- 4. These have the right of way in the facility.
- 5. Eye wash stations and safety showers need to be inspected________
- 6. Affected employees never enter _________ spaces.
- 10. Norwich's fire evacuation alarm is ____ continuous tone
- 13. Lock out tag out refers to practices to safeguard employees from the unexpected __________ of equipment.
- 14. The first thing you put on when sitting on a forklift
- 15. Safety ________ may be removed when actively packaging product, standing above a filter press and when actively dumping filter aid.
- 16. Wear ___ resistant Kevlar gloves when using a knife.
- 17. All stairways must have 2 ___________ to ensure 3-points of contact.
- 18. Safety ________, Quality Always
- 19. If you hear one continuous alarm, you should quickly _____ the facility and meet at water tower.
- 21. Portable fire extinguishers should be visually inspected each _________.
- 22. Our policy for commitment to safety is: ______For Safety
- 25. Welding and grinding are two jobs that require a ____ work permit
- 27. Your ______ may be removed when standing at the pack head and actively packaging product.