Across
- 1. What has a shaft that acts as a variable office to control the fuel exiting the governor main passage?
- 5. This type of orifice determines fuel flow rate to the injector.
- 6. What valve is designed to unseat when a designated pressure is reached in your by-pass pressure regulator?
- 7. What is added or removed from the high idle spring to adjust idle.
- 10. Orifice size can also be called ____?
- 13. What prevents the reversal of flow during deceleration and shutdown in your injector?
- 14. What is electronically opened by a solenoid and mechanically closed by a spring washer and shutdown disc?
- 15. What component is driven by the main pump shaft at engine speed and located behind the main PT pump housing?
- 16. What is based on 3 factors?
Down
- 2. This type of leakage is designed to keep PT injectors cool and lubricated when the throttle is closed.
- 3. This tool can be used to check for fuel system restrictions and done at the primary filter.
- 4. Engine speed is controlled through the use of a ____ plunger.
- 8. Pressure is created by your plunger when it is on a ____ movement.
- 9. What determines when injection will begin based off the ____ in the injector cup.
- 11. What helps control excessive smoke during acceleration on a turbocharged diesel engine?
- 12. When testing for pressure in the return line what gauge do you install to do so?