Battery Quality Crossword

2. You should check the level of ______ every 80 batteries produced.
7. Jammed________:Defect where terminal is damaged and prevents the terminal from being formed.
8. Dross is removed from the ________.
9. ________ Paste: defect type when (6) or more squares of Oxide are missing from the plate
10. On the decoupled stackers, you should weight a plate per negative and positive skid every ______ .
11. Max # of minutes plates can remain in PSTOUT before having to be placed in the chemset.
13. Number of pounds clean/dirty scrap that can be accumulated before reaching STOP POINT
16. The mold should be cleaned 2-3 time per shift or prior to _______ the mold.
18. Frequency plate scrap should be recorded.

1. Where plate dimensional are recorded.
3. Hole height is to be checked _____.
4. Only _____ should be placed in the scrap barrel.
5. Tool used to verify pose alignment.
6. Placing the lug on the wrong on of these will create T-lugs.
12. The person(s) responsible for the quality of OUR batteries.
14. How many weld tips are required for a complete machine replacement?
15. All batteries require a _______ check.
16. The _____ tester, test for battery continuity.
17. Lug defect caused by orifice plate center wiper pressure too loose: orifice plate center wiper stuck; mud build up in front of hopper; mud build up on flattener roller; or poor masking under hopper