Across
- 3. The maximum amount of weight that a machine is able to manipulate.
- 6. _____________ guards are barriers that prohibits access to dangerous operating areas while allowing operators to access parts of the machine.
- 8. _______________ curtains are a field of light that stops a machine when the light is blocked by an object.
- 9. _____________ space is the space within the maximum space that is safely limited by sensors, software, or fencing.
- 11. A reduction in the rate of an object's velocity.
- 13. ______________ fences are placed outside the work area of the robot.
- 15. A type of connection between a robot's wrist and end effector that causes the robot to stop when too much force is applied to the end effector.
- 18. ________________-sensing devices are used to detect the location of people or object near hazardous areas of a machine.
- 20. _______________ space is the space needed for a robot to perform a programmed task.
- 21. ___________ mode is a robot setting where an engineer or operator is able to control the robot's movements and save those movements as an operating program.
- 23. Liquid metal droplets and sparks expelled during a thermal cutting or welding process.
- 24. ______________ position is the starting position of a robot.
- 25. ________________ guards are barriers with tripping mechanisms that cause machines to stop when guards are removed.
- 26. An intermediate point in a path between a robot's source and target positions.
- 27. __________ point is any place where two components meet.
- 28. ______ effector is a device attached to the end of a robot arm that allows it to interact with a part, component, or material.
Down
- 1. A robot that can be programmed to learn a specific task in order to assist humans.
- 2. ___________ position is the end position of a robot.
- 4. Hand ________________ is a programming method for robots where a trainer physically moves the robot through different steps of the job process.
- 5. ____________ sensor is a device that uses electronic sensing field to detect the presence of an object.
- 7. ____________________ interference is electrical noise in a circuit that interrupts the transmission or reception of a signal.
- 10. ______________ accidents occur when a robot's movements become unpredictable and an employee is struck by the robot.
- 11. Any device that introduces motion into a system.
- 12. ___________ events are specified timeframes during which a robot must move from a source position to a target position.
- 14. ____________-sensing devices are mechanisms used to detect the location of people or objects near hazardous areas of a machine.
- 16. _________________ guards may be moved or reconfigured to allow for different types of production.
- 17. A device that detects the presence of an object or person by the amount of light present.
- 19. _______________ sensors are a type of sensor that detects an obstruction or impact before or while it occurs.
- 22. ___________________ space is shared space where a robot and human operator can simultaneously perform tasks.