Across
- 4. roof that slopes upward from all sides of a structure, having no vertical ends.
- 5. _______ course is the name of the first course on an asphalt shingle roof
- 6. ____-________ is a 1-by-4-inch boards nailed to the rafters with gaps between the boards. The spaces allow the wood shakes or shingles to breathe so that they dry more uniformly. (2 words)
- 7. _______ flashing used to divert water away from the siding and into the gutter
- 10. ____-____ is designed to remove hot air and moisture from your attic. (2 words)
- 12. ____ flashing is a rectangular piece of flashing bent 90 degrees in the center. it is used for roof to wall flashing
- 13. ____-_____is a metal strip along the roof ridge to help prevent moss (2 words)
- 14. An attic _______ keeps the insulation from blocking vents
- 18. _____-_____a non structural framing member used to align rafters (2 words)
- 20. turbine vents must be _____
- 21. a type of roof ventilation installed in the end wall of the attic
- 23. thermal polyolefin roofing
- 24. _______________ flashing flashing that is over the top of another form of flashing
Down
- 1. ______________ vents are tapered, under-shingle plastic product designed for installation along the soffit edge of the roof. iit allows air to flow freely through the 1″ roof decking slit.
- 2. _____-____ are sheets of modified bitumen are rolled out onto the roof, a hand-held propane flame is used to heat the material and adhere it to the surface. (2 words)
- 3. the width in inches when a cricket recommended
- 6. an outlet through a parapet wall to allow water to drain
- 8. which professional would you refer to for a roof structure issue
- 9. ____ wall is an attic structure to help prevent sagging roof rafters
- 11. a type of roof that has a double slope on each side, where the bottommost slope is the steepest
- 12. roofs are categorized by their covering and _____
- 15. a type of sub sheeting
- 16. the Latin word for band, this is under the edge of the roof, what we attach the gutter to
- 17. a roof structure designed to divert water away from the high side of a chimney
- 19. _________ edge flashing that is installed at the edges of the roof to help control the flow of water away from the fascia and to protect the bottom edge of the roof sheeting, directing water into a gutter
- 22. ________ roof is a roofing system that is covered with crushed rock or stones