Safety Crossword

1. Machines should be allowed to reach full speed _______________________ starting to cut.
4. Use only properly insulated or ____________________ tools.
6. _______________________should be tied back or worn under a cap to avoid getting it caught in the machinery.
7. keep your ___________________ on your work.
9. Carry sharp or pointed tools with the point __________________ .
10. Use the _____________________ tool for the job.
13. Machines should be allowed to reach full speed _______________________ starting to cut.
15. Mistakes cause __________________.
16. Each person’s ___________________ is everyone’s responsibility.
18. When operating a machine give it all your attention.
21. _______________________________ will not be tolerated. This is evidence of a poor safety attitude.
22. Lift with your _________________, not your back.
25. Damaging the cord of electrical hand-held tools may cause a(n) _____________________.

2. Always wear proper ___________________when work in the lab.
3. Take your _____________________________ when working with tools.
5. Pull the ____________________, not the cord, when you unplug a machine.
7. Never place your hand or fingers in line with any ___________________________ parts.
8. Be sure the power is off and the blade has stopped before making any ________________.
11. Before using any equipment, you should know where the ___________________ are located and how to use them.
12. ______________________ your work; measure twice and cut once.
14. Never talk to a person while he/she is ________________________ a machine.
17. The number one cause of accidents is a poor _____________________.
19. Tell the teacher _____________________if a machine doesn’t sound right, or if can see something is wrong.
20. Always usa a(n) _____________________ to clean dry materials from a table or piece of equipment.
22. If you have to ______________________ a machine, turn it off and wait until it stops.
23. Never ________________________ the machine operator.
24. Before working on _________________________ (wood or other workpieces), check it for cracks, loose knots, and nails.