Across
- 2. A stairway, ladder or ramp shall be provided at all points of access where a break in elevation of blank inches or more exists
- 4. Any unsafe equipment or conditions must be blanked by a competent person and removed from service
- 7. The company expects each employee to maintain the highest degree of blank and blank
- 9. An approved type and size blank will be in working environments and places at required locations
- 12. Any Injury or accident that occurs while on the job should be reported how soon to your supervisor or to HR
- 13. The safety of people in our facility and jobsites is whose responsibility
- 14. What department is responsible for administering and maintaining a company-wide Safety Program
Down
- 1. What is the acronym for the equipment that includes, safety glasses, masks, gloves, hearing protection and more
- 3. What type of employee is allowed to operate power-activated tools
- 5. When scaffold is being erected or dismantled it shall bear a sign reading blank until scaffold erection is complete
- 6. Only authorized employees may operate company vehicles and a valid blank must accompany each operator
- 8. Employees on a working/walking surface with an unprotected side or edge that is blank feet or more above a lower level shall be protected from falling
- 10. OSHA and the National Electrical Code requires that all electrical panels have a minimum of blank feet of clearance
- 11. A properly stocked, fully accessible and clean blank kit must be available on every project