Across
- 5. The long name for a SFE (Three Words)
- 6. The long name for a FPL (Three Words)
- 8. The long name for RX (One Word)
- 10. The lowest permitted setting of a TO in ohms
- 11. A train movement where the train axles contact the tips of the points first
- 15. The long name for BCPR (Four Words)
- 18. These rollers assist the rails when moving (Foreign Word)
- 20. Picks up when a train is on it
- 22. Used stop trains that overrun or pass through safety points in the normal position (Two Words)
- 24. You get the sum of the voltages if in __________
- 26. How many wheels do you have?
- 27. Invented the first closed track circuit way back when we were running steam trains and a good friend of Kens
- 28. The rail on a set of points that does not move (Two Words)
- 30. The one with the diode at the end of the track
- 32. Slightly higher resistance than a short
- 34. A train movement where the trains axles contact the heel of the points first
- 36. The planed rail on a set of points that does move (Two Words)
- 37. You end up at the beach when these points are not Reverse (Two Words)
- 38. The long name for a SOT (Three Words)
Down
- 1. Allows current to pass in one direction, but not the other
- 2. Only has IJ’s cut into one running rail (Two Words)
- 3. The proper long name for TT (Three Words)
- 4. The long name for HAB (Three Words)
- 7. The long name for LCA (Three Words)
- 9. Sounds like you can use this on top of a normal track circuit (Three Letter Abbreviation)
- 12. The value of resistance applied to the Relay End, required to open all front contacts and make the back ones (Three Words)
- 13. Four diodes that convert AC to DC (Two Words)
- 14. The proper long name for a TR (Three Words)
- 16. When not used for a while, this can build up and make trains disappear (Two Words)
- 17. Nearly zero ohm resistance
- 19. Track ________ Hint; Dropping the track circuit to prove it’s safe
- 20. De-rails train when these are in the Normal Position (Two Words)
- 21. The long name for a TCI (Three Words)
- 23. The technical term for nothing….
- 25. The value of resistance, starting from zero, applied to the Relay End, required to make the front contacts (Two Words)
- 29. Keeps track circuit current on the tack where you want it (Two Words)
- 31. O is the signalling alphabet of this component
- 32. The track is kept to gauge with these, and can describe a Signal Technicians normal state on Night shift..
- 33. Allows traction current to pass though it, but offers high impedance to track circuit currents (Two Words)
- 35. Starts off wavy then goes flat
