SMAW/GMAW

Edit Answers
123456789101112131415161718192021
Across
  1. 3. When the current only flows in one direction.
  2. 5. This is why MIG welding is difficult to use outside.
  3. 8. What size wire do we use in MIG welding?
  4. 11. What does GMAW stand for?
  5. 15. This device connects the ground clamp to the welder.
  6. 19. What does the 1 in 6013 represent?
  7. 20. This used to help clean the metal and the area where the weld was made.
  8. 21. What does SMAW stand for?
Down
  1. 1. This is the most common part problem with MIG welding.
  2. 2. This is used to connect the ground cable to the work piece.
  3. 4. MIG welding uses a ____ Electrode.
  4. 6. What PSI do we run the regulator for shielding gas?
  5. 7. What does the E in ER-70-6 stand for in MIG wire?
  6. 9. How many amp breaker is the power supply?
  7. 10. This tool removes the slag off of your weld?
  8. 12. What holds the electrode?
  9. 13. When electricity flows in one direction the reverses.
  10. 14. What does the 60 in 6013 represent?
  11. 16. This pressure is higher and lets you know how much gas is in the tank.
  12. 17. The width of your weld should be _____ the size of your electrode.
  13. 18. This is how we adjust the heat on MIG welding.