Solid State Circuits II

3. (TCRNUOE) The blocking oscillator can be used as a _______.
7. (RATTEMPUREE) The power rating of a transistor decreases as the ___________ increases.
9. (TTEERIM) In Franklin Oscillator, 2 common _______ amplifier stages are used which give 360 degree phase shift.
10. (NRDIA) The dc current is called the current _____ of the stage.
11. (TTCSPILO) An oscillator with a tap on the inductor in the tank circuit is called a ________ oscillator.
14. (ICOMRAHN) If the output voltage is a sine wave function of time, the oscillator is called a ________ oscillator.
17. (LVEGTOA) A circuit that can change the frequency of oscillation with an application of dc voltage is sometimes called a _______-controlled oscillator.
18. (YNUQTSI) In order to investigate stability of feedback amplifier, _______ criterion is used.
19. (GHHREI) The stray-wiring capacitance has an effect on the ______ frequency.

1. (MUMMINI) At series resonance, the impedance of a crystal is _______.
2. (WOT) An octave refers to a factor of ___ change of frequency.
3. (ROLLOCCET) The _________ current is minimum at resonance.
4. (OOPRASBTT) This method is used to achieve constant charging current.
5. (YEQEFRCUN) Frequency response is a graph of voltage gain versus
6. (BNAANRRDWO) A tuned class C amplifier is usually a __________ amplifier.
8. (NET) Decibel voltage gain is defined as ___ times the common logarithm of the power gain.
12. (EVTISOPI) The phase shift around the feedback loop must be o for ________ feedback.
13. For an input of square wave to an op-amp integrator, the output should be a ________ wave.
15. (OPLO) The product of open loop gain and feedback factor is called ____ gain.
16. (SELS) The amplifier is stable if the absolute magnitude of A is ____ than 1.