Across
- 3. used to secure objects unsuitable for the machine vice, to a work surface.
- 5. use in electrical systems as a housing for electrical wires or cables.
- 7. use for cutting rigid metal conduit.
- 8. a box that houses electrical sockets, switches, or other fixtures.
- 10. used for bending rigid metal conduit.
- 12. used for cutting rigid metal conduit.
- 13. is inserted in a brace for a few turns in reaming. After cutting the pipe with hacksaw or pipe cutter, it leaves burrs.
- 16. a device that serves to connect the ends of adjacent parts or objects.
- 17. a fitting resembling a pipe or box with a removable cover for access to electric conduits.
- 18. it is used when the conduit crosses an obstacle or when the conduit is entering an electrical box.
- 19. serves the same purpose as a electrical mettalic tubing.
Down
- 1. may be used for exposed or concealed work at the same condition with rigid metallic conduit.
- 2. are required when working in areas where there is a potential for injury to the head from falling objects.
- 3. conduits fitting with corrosion protection are permitted to be installed in concrete, direct earth burial, or in areas subjected to corrosive influences.
- 4. is an electrical enclosure that houses one or more wiring connections.
- 6. used to secure an ordinary nut from working Loose by Locking itself when screwed down tight.
- 9. its standard length follow gas pipe which is 10ft. (3m) and a diameter from 2 inch up to 6 inches (150)+.
- 11. use for bending rigid metal conduit.
- 14. a fitting installed between two Lengths of pipe or tube allowing a change of direction, usually in the 90° or 45° direction.
- 15. used for threading rigid metal conduit.