Across
- 5. cutting along the length of a workpiece.
- 8. enlarging the diameter of a hole
- 9. cutting an angled surface between two diameters on the workpiece
- 11. cutting rectangular slots in or across a part
- 12. Reducing the width of a materials
- 13. cutting across the end of a rotating workpiece
- 14. cutting into a workpiece to produce a channel with a diameter less then the main diameter of the workpiece
Down
- 1. cutting an angled surface between two primary surfacing of a material
- 2. producing a beveled outer portion of a hole
- 3. cutting off a part from the main workpiece
- 4. cutting along the length of a cylinder at a slight angle to produce a cylindrical shape with a uniformly decreasing diameter.
- 6. Reducing the length of a material
- 7. cutting threads along the outside diameter or inside a hole in the workpiece
- 10. producing a diamond pattern of grooves on the outside diameter of a portion of the workpiece
- 12. reducing the thickness of materials