Across
- 2. measure plate thickness.
- 4. bolted together and provide stronger joint.
- 5. use to seal the lubricant.
- 6. acts as hinge to connect two track links.
- 7. isolate the final drive component fom shocks and debris.
- 11. penetrates the ground to provide traction.
- 13. provides continuous rail for the roller.
- 14. use to control track tension.
- 15. designed for low to medium impact and low moderate.
- 18. connect to the main rear rollerframe.
- 23. stationary in the main frame.
- 24. equipment that use oval track.
- 25. predict of remaining track life.
- 27. track frame pivots on a___axlethat also supportthe sprocket.
- 28. are kept in the correct alignment machine main frame.
Down
- 1. maintain track tension.
- 3. provide floatation.
- 6. cartridet pin component.
- 7. controls the degree that that the roller frame oscillate.
- 8. distance between two joining shoe.
- 9. distance measure from center line of bushing.
- 10. force pushes the sleeve and guide to the right to compress the spring.
- 12. use on excavator and early track type tracktor.
- 16. connect to main frame by two point mounting system.
- 17. provide stability when digging.
- 19. guides the track and also maintain tension.
- 20. standard configuration for all track vehicle.
- 21. use to keep the clearance between the plate assembly and yoke.
- 22. support the weight of the machine.
- 26. transfer the driving loads from the final drive.