Across
- 5. The span is found by measuring from the ......... of one wall-plate to the outside of the other
- 6. In addition to calculations what other method is used to find the lengths of roofing components?
- 9. The first stage of fitting a stair case to to prepare the .....string to fit the landing
- 10. Needed in addition the breather membrane when forming opening for dormer window.
- 11. A string....... and spirit level is needed when fitting fascia to projected eaves
- 12. Doubling of common rafters is needed when incorporating a ...............window
- 13. The plumb and ..........cut is needed to form the birds mouth.
- 14. The maximum gap (mm) for the spacing of balusters.
- 15. A component used to finish closed eaves.
- 16. Glue ......... used to strengthen joint between riser and tapered tread.
Down
- 1. In addition to the run what else is needed to calculate the length of a common rafter?
- 2. .............. support is required for double roofs
- 3. A gap is required when trimming around a roof light to allow for fitting and ...............
- 4. Ready ............. used to find rafter lengths
- 7. What is the top newel post notched over?
- 8. A hipped roof returns around an ........... corner
- 15. This component gives intermediate support to the purlin.