Across
- 1. ___ points can be created when an object moves & makes contact with another object.(5/16)
- 5. ArcelorMittal Safety Program: Prevent, Improve, ___, & Share.
- 7. For suspended loads: maintain a position away from load that is greater than the ___ of the load.(1/17)
- 8. Fall protection must be used when there is a risk of falling ___ or more ft.(11/16)
- 10. The last step of any lockout procedure.(3/17)
- 12. Mild symptoms of heat ___: heat rash & heat cramps.(6/16)
- 14. ___ are the only person that can remove your personal lock from a lockout.(3/16)
- 15. A hearing conservation program must be implemented at 85 ___.(9/16)
- 17. ___ level falls: majority of fall related injuries.(1/16)
- 18. It is important to use a no-touch tool while maneuvering ___ loads.(1/17)
- 21. The ___ period: gradually allowing your body to adjust to hot environments.(6/16)
- 23. Heat related illnesses can be ___ if not taken seriously.(6/16)
- 25. Document that helps you identify hazards prior to beginning a job.(12/16)
- 27. It is important to ___ all incidents and near misses.(2/17)
- 28. A medical ___ is necessary to wear a tight fitting respirator.(10/16)
- 29. Inspecting your ___ regularly will aid in preventing falls from same level.(1/16)
- 31. Symptoms of heat ___: heavy thurst, profuse sweating, weak pulse.(6/16)
- 34. A person must be assigned as responsible for fire ____ for all hot work activities.(10/16)
- 35. Mobile equipment incidents are often low freq. but high ___ occurences.(8/16)
- 36. Fall protection equipment needs to be inspected prior to use AND ___.(11/16)
- 37. All chemical containers should have a ____ containing information on the contents and its hazards. (4/16)
- 38. An ___ is necessary for low oxygen atmospheres.(10/16)
Down
- 1. One must complete a hot work ___ prior to beginning any hot work jobs.(10/16)
- 2. Most serious heat related illness: heat ___.(6/16)
- 3. Removal of machine ____ can lead to pinch point injuries.(5/16)
- 4. Hierarchy of Controls: Elimination, Substitution, Engineering Controls, Admin. Controls, and ___.(12/16)
- 6. Proper way to use fire extinguisher: pull, aim, ___ , & sweep.(10/16)
- 7. A personal fall arrest system: full-body ___.(11/16)
- 9. One must conduct a ___ inspection to ensure a lifting device is in good condition prior to using it.(1/17)
- 11. A hazard ___ must be conducted to determine what PPE is necessary.(7/16)
- 13. Number of sections contained in a Safety Data Sheet.(4/16)
- 16. Engineering controls, like ___ , is the first choice for minimizing exposure to resp. hazards.(10/16)
- 19. Cell phone use while operating a vehicle or mobile equipment in the plant is ___.(1/16)
- 20. Standard ___ documents can be referred to when there is a question regarding required PPE.(7/16)
- 22. Noise induced hearing loss is ___.(9/16)
- 24. Acronym for method of keeping equipment from being set in motion.(3/17)
- 26. It's important to use ____ when ascending/descending stairs.(1/16)
- 30. While using a ladder, you must maintain ____ points of contact.(8/16)
- 32. Most frequently injured part of the body.(5/16)
- 33. Source of detailed information on hazardous chemicals.(4/16)