Across
- 1. loaded robot Program.
- 3. configures robot arm settings and external
- 7. robot control box.
- 8. Checksum – displays the active safety configuration.
- 11. – displays active program
- 12. – monitors and sets live Input/Output signals to and from
- 15. relative speed at which the
- 18. – starts/pauses the
- 20. password on screen.
- 21. – indicates robot health as well as any message,
- 22. – halts the currently
- 27. Menu –
- 29. – manages robot state
- 32. Programs/Installations are not available.
- 33. – opposite of “Automatic” mode. Activated by
- 34. – allows a Program to be run
- 35. Slider – shows, in real time,
- 36. – creates a new Program or Installation File.
Down
- 2. program.
- 3. File.
- 4. Control2 – Robot operations/motion is controlled via
- 5. tasks. Move Tab, Freedrive Mode, modifying or
- 6. – opens a previously created and saved Program or
- 9. or errors.
- 10. – creates and/or modifies robot programs. programs.
- 13. step of the program at a
- 14. Polyscope Help, About, and
- 16. going to the initialization
- 17. Control2 – Robot operations/motion is controlled
- 19. – Mode select where the robot can only perform
- 23. into account.
- 24. Teach Pendant.
- 25. a simple means of operating the robot using pre-
- 26. installation.
- 28. arm moves, taking safety
- 30. a “Step-Through” format (i.e.
- 31. – saves a Program, Installation File, or both at the same
- 33. – controls and/or regulates robot movement.