Across
- 2. on either side of a section
- 5. in the coil
- 7. where counter is set to measure turns
- 11. stack divided by key spacers
- 13. Voltage winding (abbrev.)
- 14. bringing bottom wire to top in section
- 18. with upsets and windup sections
- 24. to check sizes of tube and coil
- 25. space between key spacer rows
- 28. direction with coil on machine
- 29. wrap for conductor
- 30. T-4 material for winding coil
Down
- 1. dimension of tube
- 3. under/over crossover
- 4. Voltage
- 6. height (OD - ID)
- 8. material like crepe paper
- 9. to specific turn
- 10. of wire wound on insulated form
- 12. Voltage coil (abbrev.)
- 15. for conductor
- 16. from electrical height to tube end
- 17. revolution around tube
- 19. or insulated wire for current
- 20. board placed per specs
- 21. top wire to bottom for equalization
- 22. ramp for top wire in upset section
- 23. who builds a coil
- 26. bent to next section
- 27. to or from a winding