Across
- 3. This part of the tablesaw is used when completing a rip cut
- 6. Must be in place on equipment when in use.
- 7. Use the ______________ hand tool for every job.
- 8. The stock MUST be up against the __________ when completing a cut.
- 11. The minimum length (inches) for a board that may safely be cut.
- 12. Must be worn at all times in the shop.
- 15. This item is used with a hand saw to make precise angle cuts.
- 16. Use __________ or vise grips to secure the work piece.
Down
- 1. To make a crosscut or angle cut (90 degrees)
- 2. ___________ hand power tools when they are not in use.
- 4. The minimum margin of safety (inches) for the miter saw.
- 5. Report all accident and injuries to the __________.
- 9. A Safety tool used to guide wood through a table saw while keeping your hands away from the blade
- 10. This must be removed and clear from the floor at all times.
- 13. The blade must reach _____________ before completing a cut
- 14. The minimum margin of safety (inches) for the tablesaw