Across
- 2. The most life threatening hazards on a construction site typically include all of the following except?
- 6. What color tags are on the rubber gloves with the highest level of protection?
- 7. OSHA CFR 1910 is the standard for.
- 12. Under strict safety guidelines, which of the following should be used to capacitors before working on de-energized circuits?
- 15. Which of the following applies to vapor lamps Disposal of these materials is regulated by the Environmental Protection Agency.
- 16. What must happen before any work may be performed in a confined space ____________ of hazards?
- 17. Which factor determines the outcome of an electrical shock The amount of____________.
- 18. The best way to protect yourself from solvent hazards is to Read and follow all instructions on the products ____________ BOOK.
- 20. A PFAS anchorage point for a 6-foot lanyard must be able to hold _______.
- 21. A life threatening condition of the heart in which the muscle fibers contract irregularly is called?
- 22. What is the proper distance from the feet of a straight ladder to the wall one-fourth the __________ of the ladder ?
- 25. When a guardrail cannot be attached to a building, a solution may be to install a controlled ____________
- 28. A live-dead-live test is conducted in order to Verify that a circuit is
- 29. Chemicals known as _____ are often used to cool certain types of large transformers and capacitors.
- 30. What happens to the permits used to enter a confined space they are recorded in the ______________ at the end of shift and retained for a year?
- 32. Which of the following applies in a LOTO procedure__________ by every authorized employee involved in the work.
- 33. NEC section 590.6A states that the receptacle outlets requiring GF include the 125V, single-phase, 15A, 20A, and.
- 34. An important use of a hot stick is to?
- 35. Which of these statements correctly describes a double insulated power tool It can safely be used in place of a_____________?
- 36. IT is safe to assume that asbestos may be found in any facility constructed before _______.
- 37. the OSHA lockout/tagout rule protects workers from ____________ to hazardous energy sources.
- 38. What are the minimum and maximum distances (in inches) that a scaffold plank can extend beyond its end support?
- 39. Class 0 rubber gloves are used when working with voltages less than?
Down
- 1. NFPA 70E provides practical guidance in.
- 3. For safety, assume that any facility constructed before 1980 contains.
- 4. A _______ has a 3 prong plug at the end of its power cord or some other means to ensure that stray current travels to ground without passing through the body of the operator.
- 5. Tools that have a case made of nonconducting material and have been constructed so that the case is insulated from electrical energy are called?
- 8. Are responsible for most electrocution deaths due to the frequency of contact
- 9. The normal beating of a hear can be upset by an electrical current as small as.
- 10. A ________ will de-energize a circuit or a portion of it if the current to ground exceeds some predetermined value
- 11. At the end of the shift, a confined space entry permit must be.
- 13. Which of the following battery byproducts can be explosive when mixed with air
- 14. Minimum installation requirements for electrical equipment
- 19. Class 1 rubber gloves have a maximum AC use voltage of.
- 23. Which of the following should have side rails that extend 36 inches above the top support point?
- 24. If a person's heart begins to fibrillate due to an electrical shock, the solution is to have a qualified person use emergency _______ equipment.
- 26. gloves must be inspected by the user.BeforeEachUse 30A
- 27. OSHA requires you to be evaluated by a physician to ensure that you are physically fit to use which of the following types of protective equipment?
- 31. OSHA safety standards for the construction industry are contained in.
- 38. Which of the following voltages is considered low voltage __________ or less.