Across
- 2. A hole that has the same diameter along its length and passes completely through the object.
- 4. View used to show interior detail that is too complicated to be shown clearly with hidden lines
- 7. A manufacturing technology for the mass-production of plastic parts in which polymer granules are melted and then injected under pressure into a mold where the liquid plastic cools and solidifies.
- 10. A projected view that shows a specific portion of a view at an enlarged scale
- 12. A group of parts that are connected and form one unit.
- 13. Template for a sheet and gives general information about the drawing.
- 14. Describes something, such as circles, that have a common center.
- 15. A measuring instrument having two adjustable jaws typically used to measure diameter or thickness.
Down
- 1. A strategy in which geometry is defined in such a way that changes produce desired, predictable results.
- 3. A limit to a design process; A limitation or restriction.
- 5. To become progressively smaller toward one end.
- 6. In geometry, a plane (two-dimensional) figure that is described by straight line segments connected to form a closed loop.
- 8. In measurement, one-half of the smallest unit of measure (increment) on a device.
- 9. To standardize (something, such as a measuring instrument) by determining the deviation from a standard in order to correct errors.
- 11. A hole that is drilled to a specific depth and does not pass completely through the object.
- 16. An object that provides information about a feature, such as the length of a wall, the diameter of a fastener, or a detail callout.