Across
- 2. Article 210 provides the general requirements for _____ _____ not over 1,000V ac, 1,500V dc, nominal.
- 4. For dwelling units, the calculated floor area for the general lighting load shall not include ______ _____.
- 5. No conductor shall be used where its ______ temperature exceeds that designed for the type of insulated conductor involved.
- 6. Circuit breaker enclosures shall be permitted to be installed _____ where the circuit breaker is installed in accordance with 240.81
- 9. True or False: the surge-protective device (SPD) required for a dwelling unit shall be an integral part of the service equipment or be located immediately adjacent thereto.
- 10. Article 220 provides requirements for calculating branch-circuit, ______, & service loads.
- 11. In accordance with Article 225- Outside Branch Circuits and Feeders, a building or structure shall be supplied by a maximum of ___ feeder(s) or branch circuit(s), unless specifically permitted otherwise.
Down
- 1. In accordance with Article 225 - Outside branch circuits and Feeders, the disconnecting means for a building supplied by a feeder shall be installed at a(an)_____ location.
- 3. Circuit breakers shall ____ all ungrounded conductors of the circuit both manually and automatically unless specifically permitted otherwise.
- 7. Conductors for branch circuits (Article 210) are sized to prevent a voltage drop exceeding ___ percent at the farthest outlet of power, heating, and lighting loads, or combinations of such loads.
- 8. Article 215 provides the installation, overcurrent protection, and conductor sizing requirements for _____ not over 1,000V ac, 1,500V dc, nominal.