Across
- 2. If your bot is not responding to your joystick, one simple cause could be that the bumper button is not held down by a ____________.
- 6. No operations personnel are allowed inside a __________ Dispenser.
- 9. QR _________ for each joystick can be found on the “Seattle_joystick-QR-codes” slack channel or “DSE4 Joystick QR Codes” Google Drive folder.
- 12. The state in the Mission Control App showing that Scout has reached a delivery location is called _________
- 16. Once a bot is paused and you hit the “A” button on the joystick, the color of lights on the back of the bot will be __________.
- 17. A _________ cannot be paired via QR code if the robot is in Dispenser mode.
- 23. What does CX mean?
- 25. A ___________ must be cancelled before placing bots into dispenser/van.
- 27. If an ambassador feels threatened by anything in the field; interaction, dog, customer, community member, they should call a Code 3 _________.
- 28. After releasing a bot from a Hardstop state it will _____________, when the bot rocks violently back and forth to ‘test’ the brakes.
- 30. If Scout collides with person, car, or animal, but it is not life threatening, or an ambassador has experienced a non-life threatening incident, it is a Code ______.
- 31. Scout may travel autonomously into a street to navigate around objects, supposed the speed limit on that street is under _________ MPH.
- 34. What is the nickname of the button that should be pushed to release local?
- 35. What part of the robot must be at over 40% level to go on mission?
- 36. Never unplug an SSD when the blue light is ____________.
- 37. NEVER troubleshoot a bot in a ________.
- 38. Every day Scout generates a massive amount of data. After it’s processed on the bots after returning from expedition, we upload this data into our Dispenser onto a removable _______.
- 40. The ______ App is the application Ambassadors use to finish a delivery while in field.
- 41. If a bot (or van) collides with a person or animal, and it is life-threatening, or, an ambassador has experienced a life-threatening incident, it is a Code _____ and you must call 9-1-1.
- 42. “Waiting_For_Move_Health will stay in that state for at most 3 minutes. If it passes its internal checks before 3 minutes, the bot will transition to “Movement_________.”
- 43. Hitting the “Dpad-Right” button on your joystick will will open the __________.
Down
- 1. A robot in a ____________ state in the Mission Control APP is when Scout cannot move autonomously or manually.
- 3. What color is the rear lights on the robot when it is in a Paused State?
- 4. A ____________ State in the Mission Control App indicates that Scout has received a mission and is ready to begin autonomous navigation of the route.
- 5. Create a _______ _________ for any physical issue on a bot (broken flag, brake, lights, etc.).
- 7. The state in the Mission Control App indicating that Scout sub-systems are operating successfully.
- 8. Drivers, before entering a vehicle, check the exterior for any _____________.
- 10. Power off a bot in the dispenser (Leave BMS Switch on) if it is not uploading data, but only needs ______________.
- 11. Create a _____ for any software issue, multiple power cycles, bot is stuck in dispenser mode, bot can’t reach Idle.
- 12. Set all bots to __________ Mode before powering down a bot.
- 13. Create a _______ for any dispenser issue such as bots with high SSDs or low battery.
- 14. FMC stands for Fleet Management ________.
- 15. DVIR stands for Delivery Vehicle ____________ Report.
- 18. The “J” in “J-Stop” stands for ____________.
- 19. RA Stands for ___________ Assist.
- 20. The location in a zone where you start and end your missions.
- 21. If the bot brakes are flipped up in the unlocked position when it is booted, it will be in Fatal _________ and will need to be power cycled.
- 22. There are three computers or hosts in the robot, and each one has its own USB port. They are Primary, Secondary, and ______________ .
- 24. If a sidewalk curb has a 90-degree drop, it is a hard curb and a ________ is necessary to prevent damage to the bot’s wheels, chassis, or prongs.
- 26. Press right bumper on the joystick to release bot from pause state. The color of lights on the back of the bot will change from blue to _______ if the bot is Idle, no lights if bot goes autonomous.
- 29. BMS Stands for Battery _________ Switch.
- 32. Once the bot reaches its origin point, and is put in Idle, upon releasing local, your bot will go into
- 33. Once robot transitions to “Movement Ready”y, the handler band ighting color will turn solid _________. This indicates the robot is in a driveable state.
- 34. Mission Control is also called The _________ App.
- 39. What mode does the bot have to be to be put on a mission?