Supplication

6. MUST PERSONALLY INSPECT ALL TANKS AND VOIDS
12. RESPONSIBLE FOR THE PROPER CARE, STOWAGE, USE OF FUEL AND LUBE OILS
14. THE FINAL QUALIFYING AUTHORITY FOR EDO
16. REPAIRS THE ENGINEERING OFFICER MUST PERSONALLY INSPECT ALL GAS TURBINES AFTER _______ ______ _______
17. AS AN ENGINEER, IF YOU FALL YOU HAD BETTER FALL ___________
19. OVERSEE THE ADMINISTRATION OF THE DC PQS PROGRAM
20. USERS GUIDE GOVERNING DOCUMENT FOR DEVIATIONS FROM EOSS
21. CO AUTHORIZATION IS VALID FOR REPEATED ENTRY INTO TANKS AND VOIDS ON OPENED AND CERTIFIED SO LONG AS THEY _________ ________

1. SAFE PLANT OPERATING GUIDELINES ARE MAINTAINED IN _________
2. GRANTED SIGNATURE AUTHORITY FOR THE ENGINEERING LOG DURING THE INPORT DUTY PERIOD
3. DAMAGE CONTROL OFFICER
4. ASSIGNS THE CO THE RESPONSIBILITY OF THE SAFE AND PROPER SUPERVISION, OPERATION, AND MAINTENANCE OF THE ENGINEERING PLANT.
5. ALL BREAKERS MUST BE LEFT IN THE ON POSITION UNLESS _______ _________
7. IN THE ABSENCE OF THE CHENG THE CO MUST AUTHORIZE VIA LETTER OF DESIGNATION OR ___________ _________ _________ THE MPA OR QUALIFIED PERSONS TO PERFORM CG/SG CLOSE OUT
8. USED BY THE CHENG TO ISSUE INSTRUCTIONS FOR CONDUCT OF ROUTINE AND SPECIAL EVOLUTIONS PLANNED FOR THE EVENINGS.
9. UNDER THE CHENG THERE WILL BE OFFICERS AND SENIOR ENLISTED PERSONNEL SUCH AS THE MPA, DLCPO, AUXO….
10. LIMIT THE IMPACT OF AND CONTROL BATTLE DAMAGE
11. SUPERVISE THE PREPARATION OF THE DAILY FUEL AND WATER REPORT
13. ENSURE PROPER ADMINISTRATION, SUPERVISION AND REGULATION OF THE ERO09 WORK CENTER
15. RESPONSIBLE FOR THE COLLECTION AND STORAGE OF ENGINEERING RECORDS AND LOGS
18. SPARE BREAKER POSITION
22. COMLCSRONTWOINST 3540.4