Table Saw Safety

2. Never stand in the _ zone and make sure no bystanders are behind the saw before turning it on.
7. Never remove _ while the saw is running or while the blade is still moving.
8. The miter gauge is always used to make _ cuts.
9. Ask your instructor for help when sawing boards longer than _ feet.
11. The blade should never be higher than _ of an inch above the workpiece.
13. A push stick must be used for ripping boards less than _ inches wide.
14. The guard and riving knife may _ be removed when operating the table saw.
17. Do not cut wet or _ boards on the table saw.
18. Never _ a board into the blade and do not back a board out of a cut.
19. Never _ cut on the table saw.

1. The fence is always used to make _ cuts.
3. Keep the saw _ and free of sawdust and scrap wood.
4. Only the _ may turn on the table saw
5. Ask your _ if you are unsure a sawing procedure is safe.
6. Always ask your instructor for permission to use the table saw before using it. Be prepared to show and/or explain what you will be cutting.
7. Do not use the miter gauge and the fence at the _ time.
10. Always make adjustments when the power is _ and the saw in unplugged.
12. _ must be kept out of the guard
15. All boards must have a straight _ to be cut on the table saw. This _ must go against the fence.
16. Boards less than _ inches long and/or 1 1/2 inches wide may not be cut on the table saw.